A. LCD-Monitor|B. Monitorständer|C. Monitorfuß

D. Netzkabel|E. DP-Kabel|F. Benutzerunterlagen

G. HDMI-Kabel|H. S Switch|I. Shield

Illustration of package contents
Illustration of package contents

Note

Die hier gezeigten Abbildungen können vom tatsächlichen Lieferumfang und dem für deine Region gelieferten Produkt abweichen.

Inhalt
Einrichtung
S Switch (Schnellzugriff auf Einstellungen)
Bildschirmeinstellung
Shield installieren (optional)
Einrichtung
S Switch (Schnellzugriff auf Einstellungen)
Bildschirmeinstellung
Shield installieren (optional)

Einrichtung

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch (Schnellzugriff auf Einstellungen)

A. Für PUBG|B. Für APEX|C. Für Fortnite

Quick settings access by S Switch.
Quick settings access by S Switch.

Bildschirmeinstellung

Adjust the viewing angle.
Adjust the viewing angle.

Shield installieren (optional)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

Schnelle Anpassung über ein Mobilgerät

ZOWIE Sync: Verbinde und steuere deinen Monitor mit nur einem Tippen über die mobile App.

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*Die Position des NFC-Sensors kann je nach Gerät variieren.

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.