A. Monitor LCD|B. Podstawa monitora|C. Stopa monitora

D. Przewód zasilający|E. Kabel DP|F. Dokumentacja użytkownika

G. Kabel HDMI|H. S Switch|I. Osłona

Illustration of package contents
Illustration of package contents

Note

Przedstawione tutaj obrazy mogą różnić się od rzeczywistej zawartości i produktu dostarczanego w danym regionie.

Content
Konfiguracja
S Switch (szybki dostęp do ustawień)
Regulacja ekranu
Montaż osłony (krok opcjonalny)
Konfiguracja
S Switch (szybki dostęp do ustawień)
Regulacja ekranu
Montaż osłony (krok opcjonalny)

Konfiguracja

1.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

2.

Turn the base counterclockwise until you cannot go further.
Turn the base counterclockwise until you cannot go further.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect S Switch and PC video cable.
Connect S Switch and PC video cable.

6.

Connect the headphone.
Connect the headphone.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

S Switch (szybki dostęp do ustawień)

A. Dla PUBG|B. Dla APEX|C. Dla Fortnite

Quick settings access by S Switch.
Quick settings access by S Switch.

Regulacja ekranu

Adjust the viewing angle.
Adjust the viewing angle.

Montaż osłony (krok opcjonalny)

1.

Remove the stickers and the rubbers on both sides of the monitor.
Remove the stickers and the rubbers on both sides of the monitor.

2.

Attach the Shields to the monitor.
Attach the Shields to the monitor.

3.

Adjust the hoods to the desired angle.
Adjust the hoods to the desired angle.

Szybka regulacja z urządzenia mobilnego

ZOWIE Sync: Połącz i steruj monitorem jednym dotknięciem za pomocą aplikacji mobilnej.

1.

2.

Enable Bluetooth on the mobile device and the monitor.
Enable Bluetooth on the mobile device and the monitor.

3.

*Położenie czujnika NFC może różnić się w zależności od urządzenia.

Tap the device's NFC sensor against the NFC detection area on the monitor.
Tap the device's NFC sensor against the NFC detection area on the monitor.

4.

Adjust the monitor settings from your device.
Adjust the monitor settings from your device.