XL2411

Since everyone is unique, and have different vision conditions and sensation on color and brightness. Thus, The cause of the discomfort to everyone may be very different. Even if the monitor has the same settings and displays the same image, some people may feel uncomfortable, while others may not. Following are a few tips, and we suggest you can try to adjust to alleviate the discomfort condition:

XL2411 supports the "Blur Reduction" function. The default setting is set to "Off". To enable this function, please go to OSD > Picture > Blur Reduction > select "ON".

That is Overdrive/Response Time Compensation (RTC) function in RL/XL series. This technology is based on applying an over-voltage to the liquid crystals to motivate them into their orientation faster. We will usually quote a "grey to grey" (G2G) response time figure on displays using this technology since they are normally the fastest transitions available.

On ZOWIE website, we didn’t show response time to XL2546S and XL2546K as well as all our XL & RL series.

There is always a trade off between overdriving the panel to make it faster which results in bad display quality. XL series fully leverage the panel fast response, but also considering an optimized setting for the overall experience. It is suggested that you can check other user's sharing on website, or test it by yourself in person which would be ideal.

All ZOWIE monitors are mercury free.

NVIDIA driver 418 or earlier versions support 3D function.

This monitor has a VESA standard mount with 100mm pattern, allowing the installation of a wall mount or arm bracket. Please use M4x10mm screws and possible wall mount adapter accessory when doing the installation. Please check with the wall mount/arm kit vendor or check with ZOWIE RMA for further assistance if any.

All ZOWIE monitors support 100V~240V.

No, this monitor does not have a built-in speaker.

Please refer to the compatible model list below.

Please check the following:

Please turn off the 3D function of the graphic card. For the 3D setting details, we suggest consulting with the graphic card / PC / NB OS service center.

If the power LED is on or there is a beep sound:

Any custom resolution/Hz setting may damage your monitor due to out of the operation range different from what the monitor has been designed for, and it may make your monitor out of warranty accordingly.