XL2546S

  • How can I make Variable Refresh Rate (Adaptive-Sync / FreeSync Premium / G-Sync Compatible) work on my monitor?

  • En savoir plus
  • I sometimes feel headaches or eyes soreness while using the monitor. What can be adjusted to alleviate the discomfort if I feel unwell?

  • Since everyone is unique, and have different vision conditions and sensation on color and brightness. Thus, The cause of the discomfort to everyone may be very different. Even if the monitor has the same settings and displays the same image, some people may feel uncomfortable, while others may not. Following are a few tips, and we suggest you can try to adjust to alleviate the discomfort condition:

    En savoir plus
  • What is the optimal Hz performance for users to turn on the "DyAc", "DyAc+" or "Blur Reduction" function in the OSD?

  • En savoir plus
  • I don't like default color settings, what should I do?

  • En savoir plus
  • My Laptop or graphic card doesn't have DP port, can I buy adapter for running 144Hz, 240Hz or 360Hz?

  • En savoir plus
  • Why can't I enable the DyAc / DyAc+ and Freesync Premium function / Adaptive-Sync at the same time?

  • En savoir plus
  • Can I use any adapter to switch signals or different port types between the monitor and connected devices?

  • En savoir plus
  • How do I enable VRR (variable refresh rate) on PS5 and Xbox Series X/S for ZOWIE monitors?

  • En savoir plus
  • Why does the recorded screen video flicker when I record it with my phone?

  • En savoir plus
  • What does the "Profile to Go" feature available on select gaming monitors mean?

  • En savoir plus
  • What is the difference between DyAc and DyAc+?

  • DyAc+ is based on this same technology (DyAc) and through panel optimization (with little faster panel response), provides gamers with a different option for actions such as spray control.

    En savoir plus
  • When I use the monitor with AMA function , its leaves a shade when scrolling the page, when turning OFF the AMA , the shadows issue doesn't happened. Is there any advice you can provide?

  • That is Overdrive/Response Time Compensation (RTC) function in RL/XL series. This technology is based on applying an over-voltage to the liquid crystals to motivate them into their orientation faster. We will usually quote a "grey to grey" (G2G) response time figure on displays using this technology since they are normally the fastest transitions available.

    En savoir plus
  • Why don’t you share response times for XL and RL models on your website anymore?

  • On ZOWIE website, we didn’t show response time to XL2546S and XL2546K as well as all our XL & RL series.

    En savoir plus
  • Since an official response time spec is not available anymore, what other response related spec should I check if I’m comparing your monitors with models from other brands?

  • There is always a trade off between overdriving the panel to make it faster which results in bad display quality. XL series fully leverage the panel fast response, but also considering an optimized setting for the overall experience. It is suggested that you can check other user's sharing on website, or test it by yourself in person which would be ideal.

    En savoir plus
  • Are all ZOWIE monitors or only certain models mercury free?

  • All ZOWIE monitors are mercury free.

    En savoir plus
  • What is the difference between FreeSync, FreeSync Premium, and FreeSync Premium Pro (or FreeSync 2)?

  • Please refer to the AMD website for details on differences between various FreeSync versions :

    En savoir plus
  • Which models are compatible with PS5 and Xbox Series X/S for Variable Refresh Rate (VRR)?

  • En savoir plus
  • What VESA mount should I use on this monitor?

  • This monitor has a VESA standard mount with 100mm pattern, allowing the installation of a wall mount or arm bracket. Please use M4x10mm screws and possible wall mount adapter accessory when doing the installation. Please check with the wall mount/arm kit vendor or check with ZOWIE RMA for further assistance if any.

    En savoir plus
  • What is minimum refresh rate that DyAc / DyAc+ is working?

  • The minimum refresh rate of enabling DyAc is 100hz. Higher refresh rate will provide a better DyAc performance.

    En savoir plus
  • Does this monitor support 220V or 110V?

  • All ZOWIE monitors support 100V~240V.

    En savoir plus
  • What is the input lag of this monitor? What is the response time of this monitor?

  • En savoir plus
  • Which graphic card is minimum requirement for running 240Hz/360Hz?

  • En savoir plus
  • Does this monitor have speaker?

  • No, this monitor does not have a built-in speaker.

    En savoir plus
  • As I can't get the official response time spec now, which actual response performance is faster? XL2546K or XL2546S? Specially in some store website shows XL2546S response time is 0.5ms, and XL2546K is 0.5ms~1ms, does it means XL2546S is faster?

  • On ZOWIE website, we didn’t show response time to XL2546S and XL2546K as well as all our XL & RL series. The reason is: there is no universal measurement standard to response time in the industry, which means: every brand have a different condition to claim response time, and this means that the response time (whatever number we claim) will not help customer to have a reference when making a decision.

    En savoir plus
  • Which models are compatible with PS5 and Xbox Series X for 1080p @ 120hz?

  • Please refer to the compatible model list below.

    En savoir plus
  • Which inputs are supported by NVIDIA G-Sync Compatible and AMD FreeSync Premium?

  • En savoir plus
  • How can I check if my FreeSync or Adaptive-Sync monitor also supports NVIDIA G-Sync Compatible?

  • En savoir plus
  • Why do some games exit when FreeSync Premium / Adaptive-Sync is turned off or on?

  • This is normal behavior, much like making major changes to the graphics settings of a game. When FreeSync Premium is enabled or disabled with a game running, some games will be affected because graphics settings need to be reset for the change to take effect.

    En savoir plus
  • Why can’t I set the frequency to 240Hz/360Hz on my monitor?

  • Please check the following solution :

    En savoir plus
  • Why can't I turn on my monitor?

  • If the power LED is on or there is a beep sound:

    En savoir plus
  • Why is my monitor flickering or showing no signal when I plug the cable properly, what should I do?

  • Sorry, this should not happen in normal condition. Please contact our customer service. We'd like to investigate your monitor problem and provide further assistance.

    En savoir plus
  • Why does my monitor keep showing no signal even though the DisplayPort cable is connected properly, and what should I do?

  • Please check the following:

    En savoir plus
  • The monitor shows random colors onscreen when I use an S Switch. What can I do?

  • Please refer to the following steps:

    En savoir plus
  • Why my monitor doesn't work after creating a custom resolution to overclock the hz of the monitor?

  • Any custom resolution/Hz setting may damage your monitor due to out of the operation range different from what the monitor has been designed for, and it may make your monitor out of warranty accordingly.

    En savoir plus
  • How do I set the monitor's refresh rate to the highest value as the monitor spec claimed (EX: 144, 165, 240, 360Hz)?

  • En savoir plus